microwave57
Vernal, UT
age: 52
|
Have any of you tryed a hydrogen cell on your outfit.
I made some out of ss dairy pipes out of the old barn
put it on my 65 chev van with a 292 cost about $20
and it went from 18mpg to 25 just like that.
Meet singles at DateHookup.dating, we're 100% free! Join now!
|
vintage57
Galesburg, IL
age: 52
|
I believe this is the future,at least should be.
|
nevereverhere
Westminster, CA
age: 58
|
a description of how you did it with some pic's would be nice
|
microwave57
Vernal, UT
age: 52
|
I don't have any pic but the thing is get some stainless steel u can use anything
flat,roundpipe or whatever and you get it about 1/8" apart but not touching each
other and hook it up to 12v. then get some water and put a little bit of nitergon
ferterlizer in it the more you put in the more better it conducts, so you put in
enough so it draws how many amps you want it to pull from your system say 30a.
I used ss dairy pipe inside of a round down hole oil well pump screen, it seems
heavy duty screens work the best because of the holes. and I got some pvc put a
plug on one end and a screw on lid on the other, put a 3/8 nipple and run it in
with the pvc. there a site the I will post next thats good to look at.
you need heavy wire to handle the amp and run it through a seperate ele system
with a toggle switch and a amp gage.
|
microwave57
Vernal, UT
age: 52
|
look under waterpowerdcar.com or how to make browns gas
just get some stuff and start expermenting it wont take
long before you get some pretty hot stuff. its a combanation
of fluid,amps,surface area and messin around with it.
but be careful and only use plastic containers so when
you blow it up you dont get wounded to bad it is some
hot stuff, like actelene and oxy mixed only better.
|
nevereverhere
Westminster, CA
age: 58
|
i checked out that site and several others, could you keep us up to date on your experience with it , thanks
|
microwave57
Vernal, UT
age: 52
|
what I am working on now is one for a chev 454 with 11-1 comp they say
it even works better with high compression, the thing is it creates heat
and you need to keep the amps down to prevent that. so you get more than
one cell and hook it +-+-ect and you can get good gas with less amp or heat.
|
awiata
Monroe, NC
age: 36
|
it works much better with a carbureted engine. efi is much harder because the computer will see a lean condition and readjust the fuel mixture
|