7/5/2013 6:08:26 PM |
I want to build my dodge neon SRT4 to 450+HP? |
|
treyrollins
Fort Stewart, GA
23, joined May. 2013
|
What Parts Should I Go With?
Meet singles at DateHookup.dating, we're 100% free! Join now!
|
7/5/2013 10:14:49 PM |
I want to build my dodge neon SRT4 to 450+HP? |
|
gonnagetbanned
Adrian, MI
29, joined May. 2013
|
What Parts Should I Go With?
Lol. A new car?
|
7/6/2013 12:29:24 AM |
I want to build my dodge neon SRT4 to 450+HP? |
|
quagm1re
Las Vegas, NV
26, joined Apr. 2011
|
Lol. A new car?
^^^LOL.
Bigger turbo (t3/t4), bigger injectors, bigger fuel pump, stand alone programmer, etc, etc, etc. If I'm correct, on these cars you have to get beafier axles and and built tranny's (they don't hold up too well with hard launches and increased power.)
|
7/6/2013 2:25:44 AM |
I want to build my dodge neon SRT4 to 450+HP? |
|
farmergabe
Junction City, KS
33, joined Jul. 2013
|
Honestly Quag, he has to pour a lot of cash into it just to get NEAR 400hp. This site breaks it down in stages. which means to hit the numbers he has to mix and match parts. And the stage 3 mopar turbo kit is 3599 bucks by itself. Because you don't run the stock intercooler, and engine cooling system. Everything needs beefed. Sure the block and internals can take 500hp. But the rest? not so much.
|
7/6/2013 3:32:57 AM |
I want to build my dodge neon SRT4 to 450+HP? |
|
treyrollins
Fort Stewart, GA
23, joined May. 2013
|
Im Pushing 290HP Right Now With Tuner And Intake System About To Run A Bigger Turbo And Injectors And Piping And Intercooler To Where I Will Push At Least 320HP And Then When My axles And Stage 3 Clutch And Cams Comes In I Will Run It Higher BC Im Getting A RebuiltTranny For cheap BC I Know Some People And Im Not Going Mopar It's Going To Be built For The Most Part.
|
7/6/2013 3:36:30 AM |
I want to build my dodge neon SRT4 to 450+HP? |
|
treyrollins
Fort Stewart, GA
23, joined May. 2013
|
And Also No I Had This Car For Awhile jUst Never Got Around The Time To Work On It To Put MoreInto it
|
7/6/2013 8:24:13 AM |
I want to build my dodge neon SRT4 to 450+HP? |
|
karrpilot
Oswego, IL
52, joined Jul. 2009
|
This is what you should do. Save up your cash until the 2014 Camaro Z28 comes out in the fall. You give the Chevrolet dealership the money, they give you the keys to the car (which won't break down like a Neon will), and there is no building involved.
Simple plan. Besides, you will now have all summer to sell off the parts you foolishly threw at a disposable Neon.
|
7/6/2013 8:53:40 AM |
I want to build my dodge neon SRT4 to 450+HP? |
|
farmergabe
Junction City, KS
33, joined Jul. 2013
|
Trey you just proved a point. You are doing HOW much just to gain another 30hp? And really the stock cams can hold and work well within the power range you want. Unless you plan to track and drag the car. Im not going to discourage you from doing what you want. I'm just being honest. The money even if you are cheap about it. Could be used on a different car and the numbers be astronomical.
|
7/6/2013 9:30:05 AM |
I want to build my dodge neon SRT4 to 450+HP? |
|
treyrollins
Fort Stewart, GA
23, joined May. 2013
|
Im Using It As A Drag CaR And It's Not Really 30HP I Was Must Guessing Using I dont Know Till I Do It. And I Can Spend About 5K And Build It To Close To What I Want AndEven Right Now I It's Still Drive Great And I Have Launched it But No Hard Launched.Until New CV Axles. I Was Hoping For Suggestions But Yall Are No Help BC I Don't Really Care For Cheap BC It's Better Built Than Bought. And I Have A 69 Nova That Me And My Dad Built Pushing Crank1000+HP To The crank. And I Use To Have A 2006 Ford Mustang Gt Build It Up To 1050+HP And 1100 Ft Lb To The Crank With 3 Different Set Of tires For It. I Just Wanted To Try And Build A TuneR.
|
7/6/2013 9:53:57 AM |
I want to build my dodge neon SRT4 to 450+HP? |
|
farmergabe
Junction City, KS
33, joined Jul. 2013
|
no help? this is a general automotive forum. I've actually provided some insight to what MOST people would need to consider. And honestly you never mentioned the important things. What cost range you wanted. You gave a number for power. So no we wouldn't be of help. Its a dating site. Good luck either way with your project.
|
7/8/2013 6:06:12 PM |
I want to build my dodge neon SRT4 to 450+HP? |
|
mierze6140
Middletown, CT
32, joined Mar. 2008
|
I'm always skeptical when people say they've built thousand horse cars and then go to a dating site automotive forum asking what they need to achieve power levels less than half of what they've already made on other cars.
I'm not a fan of suggesting people get an entirely different car, but in this case, it really is the best route. SRT4s were everywhere when they first came out. Now they're all but extinct. Reason? Terrible reliability and build quality.
|
7/8/2013 6:21:57 PM |
I want to build my dodge neon SRT4 to 450+HP? |
|
farmergabe
Junction City, KS
33, joined Jul. 2013
|
I'm always skeptical when people say they've built thousand horse cars and then go to a dating site automotive forum asking what they need to achieve power levels less than half of what they've already made on other cars.
I'm not a fan of suggesting people get an entirely different car, but in this case, it really is the best route. SRT4s were everywhere when they first came out. Now they're all but extinct. Reason? Terrible reliability and build quality.
Truth. Hell neon's gum up more junkyards than any other model. At least around here.
|
7/16/2013 8:16:31 AM |
I want to build my dodge neon SRT4 to 450+HP? |
|
treyrollins
Fort Stewart, GA
23, joined May. 2013
|
Truth. Hell neon's gum up more junkyards than any other model. At least around here.
At Least Around Here There Is More Neons And Rbis And Most I Have Seen In Junkyard Is Hondas And trucks
|
7/16/2013 8:29:14 PM |
I want to build my dodge neon SRT4 to 450+HP? |
|
quagm1re
Las Vegas, NV
26, joined Apr. 2011
|
If you fully built a motor from the ground up, for the most part, it really doesn't matter what kind of car or motor it is. It's just not going to be cheap. G/L w/ your build OP.
|
7/21/2013 2:46:59 AM |
I want to build my dodge neon SRT4 to 450+HP? |
|
peterpan86
Blissfield, MI
29, joined Jul. 2013
|
Over 1000hp out of a 3 valve and no clue how to build that SRT to 450hp... Good God.
|
7/21/2013 9:55:35 AM |
I want to build my dodge neon SRT4 to 450+HP? |
|
farmergabe
Junction City, KS
33, joined Jul. 2013
|
Over 1000hp out of a 3 valve and no clue how to build that SRT to 450hp... Good God.
But remember. 3 sets of tires!
|
7/21/2013 11:18:02 AM |
I want to build my dodge neon SRT4 to 450+HP? |
|
peterpan86
Blissfield, MI
29, joined Jul. 2013
|
That makes the power... Lol. Those mustangs are pigs anyways.
|
7/22/2013 8:23:01 PM |
I want to build my dodge neon SRT4 to 450+HP? |
|
motorcycleman4u
West Jordan, UT
47, joined Jul. 2013
|
Lol. A new car?
|
7/25/2013 1:56:45 PM |
I want to build my dodge neon SRT4 to 450+HP? |
|
silver03cobra
Peoria, AZ
29, joined Jul. 2013
|
www.agpturbo.com
I have a 66/74/12 for my cummins they build good stuff
|
7/31/2013 8:36:12 AM |
I want to build my dodge neon SRT4 to 450+HP? |
|
revolve
Virginia Beach, VA
30, joined Jul. 2012
|
What Parts Should I Go With?
The dealer has three stages of performance for this model. You can always consult your local dealership for an upgrade with genuine factory parts, or head down to the tuner shop and discuss it will them.
When it comes to force induction there are so many factors to take into account it is nigh impossible to accurately decide which parts will give you the results. For example, you could go with a massive T3 turbo that gives you 450 BHP, yet it takes for ever to build the power and once you shift it will disappear.
|
7/31/2013 3:04:37 PM |
I want to build my dodge neon SRT4 to 450+HP? |
|
peterpan86
Blissfield, MI
29, joined Jul. 2013
|
The dealer has three stages of performance for this model. You can always consult your local dealership for an upgrade with genuine factory parts, or head down to the tuner shop and discuss it will them.
When it comes to force induction there are so many factors to take into account it is nigh impossible to accurately decide which parts will give you the results. For example, you could go with a massive T3 turbo that gives you 450 BHP, yet it takes for ever to build the power and once you shift it will disappear.
Massive t3 huh? Lol. Anything with t3 style flange would most likely be fine as long as he kept his A/R down... Say .48 max for a street car. Be careful running anything Holset though... The A/R vary widely, and unless the turbo is new, you have to know how to properly measure the the hotside inlet flange or you'll have a pig.
For your app, consider porting (port matching, preferably), better cams with slightly more lift and a more duration toward the exhaust side, and a decent exhaust, tune, and intercooler upgrade prior to a turbo upgrade. Once this is done, you can determine which part of the powerband needs tweaking and you can purchase a turbo based on your preference.
|
8/5/2013 4:39:47 PM |
I want to build my dodge neon SRT4 to 450+HP? |
|
revolve
Virginia Beach, VA
30, joined Jul. 2012
|
Massive t3 huh? Lol. Anything with t3 style flange would most likely be fine as long as he kept his A/R down... Say .48 max for a street car. Be careful running anything Holset though... The A/R vary widely, and unless the turbo is new, you have to know how to properly measure the the hotside inlet flange or you'll have a pig.
For your app, consider porting (port matching, preferably), better cams with slightly more lift and a more duration toward the exhaust side, and a decent exhaust, tune, and intercooler upgrade prior to a turbo upgrade. Once this is done, you can determine which part of the powerband needs tweaking and you can purchase a turbo based on your preference.
Hop-off, homie.
|
8/5/2013 7:49:04 PM |
I want to build my dodge neon SRT4 to 450+HP? |
|
peterpan86
Blissfield, MI
29, joined Jul. 2013
|
Hop-off, homie.
Perhaps you should learn something before you open your mouth.
|
8/26/2013 6:16:52 PM |
I want to build my dodge neon SRT4 to 450+HP? |
|
913boy
Lenexa, KS
23, joined Aug. 2013
|
Quote: "Im Pushing 290HP Right Now With Tuner And Intake System"
Thats bs. I'm tuned to E85 with 888cc injectors, big front mount inner cooler, full 3" exhaust, intake and more and I had it professionally tuned and it's at 305hp.... 290 with your diablo and intake will add MAYBE 20hp tops.
|
9/20/2013 9:42:48 AM |
I want to build my dodge neon SRT4 to 450+HP? |
|
latinlover415
San Francisco, CA
28, joined Jul. 2013
|
U have to rebult our engaine or add better turbo better pistons heads cams and if u going over 400hp your trany will not support the stress and u can't smog the car u will not pass the Engaine. Emissions and i have to do a tuneup u need a better exhaust to keep the pressure and a e 85 tune up aleast.. i have a 2013 evolution x MR with 290 hp factory and the car now have 649 hp and i invest over 30 k on just the motor and. Trany man if u wanna do something do it rigth now im going to sell my car so i can buy the new mustang roush or the new super snake Shelby yeah street legal 600 hp plus roush 750 plus. And super snake mustang 850 hp +. Price tag starting at 68 k dollars xD get new car is better.
|
9/29/2013 11:45:46 AM |
I want to build my dodge neon SRT4 to 450+HP? |
|
earl425
Houston, TX
60, joined Jun. 2013
|
Modify your brain for awareness and forget about the car
|
11/26/2013 12:32:23 AM |
I want to build my dodge neon SRT4 to 450+HP? |
|
jessie223
Schofield, WI
23, joined Aug. 2013
|
Google 420a engine that's what's in it..same as n/a dsms i have a good friend that has a 02 srt4 thats pushing good power
I would biuld it..why..why the f**k not be different have a kick a** neon ive seen some with kits that actually look pretty sharp..
For the biuld id do
264/264 cams
Bc valve springs
Adj cam gears
Gates timing belt
Arp head studs
Eagle rods
8.5/1 comp forged pistons
Crank will be fine
Acl bearings
T3/t4 turbo
880cc injectors
And send ur ecu in and get a base tune
Safc to fine tune
Wideband
Clutch
Fmic
if you have to ask i doubt you van do it... lots of research...go to dsm tuners they have forums on this lol
|