5/10/2013 9:16:08 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
stargazzer
Creighton, NE
66, joined Feb. 2007
|
Not so bill as she will always drive off, Have some coffee And think about it? As her driveing off may not be all that bad for happyness
Meet singles at DateHookup.dating, we're 100% free! Join now!
|
5/10/2013 10:16:55 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
bub049
Minneapolis, MN
67, joined Oct. 2010
|
I kinda like this thought!!!!
Hmmm.... female gear heads....
Dayum!!!!
Too bad I am beyond Miss Orz's 26 mile limit....
Now she is a gearhead lovers dream....
Does nice bodywork (old school)....
Good mechanic....
"Sweet Dreams are made of this...." I'm in a musical mood today.....
Maybe get off of here and fire up the stereo.....
|
5/10/2013 2:10:50 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
stargazzer
Creighton, NE
66, joined Feb. 2007
|
Suprise suprise!! The guy that did my motor & were I got the two TT truck frames & rear ends but missing one front axel called yeterday & said he had one I could have if I wanted So I went over today to look, I did not see anything of the missing one. But I was able to find one of three that I may get some good from ? Figured it was the best I was going to do
Geting my McCormic 1941 LB motor just about painted, trying to do a real nice job of it takes a bit of time. Paint is not drying fast lately
You know Bub you could fire up your corvar & do the driveing to Miss orz
Personaly I think a trip their would be a blast for you both
|
5/10/2013 4:31:13 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
bub049
Minneapolis, MN
67, joined Oct. 2010
|
You know Bub you could fire up your corvar & do the driveing to Miss orz
Personaly I think a trip their would be a blast for you both
May stop on by there either on my way to Corvair Convention in Michigan in July.
Will be going down I94 right through her town.....
I want to look through her back 40 storage lot.....
Gearheads heaven.....
|
5/10/2013 4:52:10 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
igayle
Marshfield, MO
75, joined Jun. 2010
online now!
|
And of course she's not too bad either............
Just sayin'.....................
|
5/10/2013 5:46:23 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
motorcity4570
Marysville, MI
64, joined Jun. 2009
|
Hey BuB ~ Where in MI are they holding the corvair Convention ? Will it be down town Detroit ?
|
5/10/2013 9:02:51 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
morles
San Antonio, TX
70, joined Nov. 2007
|
I kinda like this thought!!!!
Hmmm.... female gear heads....
Dayum!!!!
Too bad I am beyond Miss Orz's 26 mile limit....
Now she is a gearhead lovers dream....
Does nice bodywork (old school)....
Good mechanic....
"Sweet Dreams are made of this...." I'm in a musical mood today.....
Maybe get off of here and fire up the stereo.....
Broder Bub.. if you go to miss Orz's make sure Joe isn't around..
.............I heard he is a bit the Jealous Type...
I would settle for one that just knew the alternator for a Start motor..
...........or even what a flat tire is..
[Edited 5/10/2013 9:05:53 PM ]
|
5/10/2013 9:19:18 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
morles
San Antonio, TX
70, joined Nov. 2007
|
Now this is what "Precious Beautiful Lovely.. I LOVE YOU" is suppose to be..
.........
[Edited 5/10/2013 9:20:24 PM ]
|
5/10/2013 9:39:40 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
bamafreebird
Brownsboro, AL
61, joined Jan. 2013
|
Anybody come up with 57 Dodge or Plymonth?
|
5/10/2013 10:04:10 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
morles
San Antonio, TX
70, joined Nov. 2007
|
......................This Dodge was posted on page 71 on this Thread..
eader]Quote from bill_43:
Here's one for Ms Orz....
I do like this Desota or Dodge..??? Not sure which.. I can't remember the Grill as the one on this Car.. I wonder if it may be a Canadian...??? They seem to change American Cars a bit for the Canadian's buyer's for what reason I have no idea..???...
........Oh and this is one car that definitely needs Air Bags and Slam it down...
It's a '57 Dodge Coronet..... stock body and trim.....
They (and all Mopars in 57-58) rusted badly and very fast, so they didn't last long. This would be the big brother to "Miss Belvedere" from Oklahome City. The '58 is very similar with just minor trim changes. The '57 had big turn signals instead of the second headlight on each side. The '58 had the quad headlights.
[Edited 5/10/2013 10:07:52 PM ]
|
5/11/2013 12:43:02 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
morles
San Antonio, TX
70, joined Nov. 2007
|
Now this is what "Precious Beautiful Lovely.. I LOVE YOU" is suppose to be..
.........
Just to KQQL....
|
5/11/2013 2:04:20 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
bub049
Minneapolis, MN
67, joined Oct. 2010
|
Hey BuB ~ Where in MI are they holding the corvair Convention ? Will it be down town Detroit ?
Hey Motor..... July 16-20 in Kalamazoo......
Autocross, road rally, formal Concours and "peoples car show".....
website: www.vairiation2013.com
|
5/11/2013 3:49:26 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
motorcity4570
Marysville, MI
64, joined Jun. 2009
|
Hey Motor..... July 16-20 in Kalamazoo......
Autocross, road rally, formal Concours and "peoples car show".....
website: www.vairiation2013.com
~
~ Thanks BuB for the info
~ WoW, A lot of people are up late ~ or are up early !!! ~ There will be some napping today !!!
~
~ Coffee is on ~~~
|
5/11/2013 8:08:22 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
stargazzer
Creighton, NE
66, joined Feb. 2007
|
I guess joe could be were the "blast" may come from at Miss orz's farm Good thing I too have a 26 mile limit
Coffee is hot
|
5/11/2013 9:43:01 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
morles
San Antonio, TX
70, joined Nov. 2007
|
|
5/11/2013 12:09:59 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
kanedog
Onaway, MI
69, joined Dec. 2007
|
Who cut the head off that ET and where's the space ship ?
|
5/11/2013 2:03:07 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
orz
Portage, WI
64, joined Jul. 2010
|
Ok gang!!! Joe knows alllll about you mecreants!! He showed up and brought a power tool...saw to cut the door into the shipping container. He knows I avoid things that sever arteries and that I popped two spot welds and then found out it was seam welded too. Helped me frame a doorway. Now I will frame to go inside that frame and nail the metal back on to that and make a hatch door for it. Eric is supposed to bring me his semi trailor I am buying for a grand this weekend. I will have storage galore!! Empty the house of books and clothe, fill the trailor with the wood chipper and brush hog I had to own and not use...the cub cadets riding mowers from the 60s,extra chainsaws and whatever else takes up room so maybe...I can get a CAR in the newer garage???? Sorry Bub, my stash doesnt have ANY corvair stuff. My convert got junked long ago. That was a cool ride. And that lovely red and chrome pic has me As purty as any jewelry for sure!! The caddi took me back...sigh...my 59 Caddi El Dorado. Prettiest car EVER built. Even if it did try to kill me all the time and un-taught me how to paralell park!!!! 22 feet long.... I would drive uptown to park before the stores opened so I could have half a block!!! That long chrome strip did make a better look. I was downhill and got a good look at my 70 coupe deville. Tenant said he backed into the tail light. Oh HELL YES!!! Housing and all!!! If I dont sell it and do restore it..he is buying one EXPENSIVE hard to locate tail light for me!!!! That is the third vehicle hes hit. What does he do? Drive by richochet? Joe brought his camera to take pics of the Heavy chevy seats or whatever they are in the 70 chevelle that nit paid down on and never took. Not going with the second go around. Sell those separately. If it ever stops raining...ever settles temp...will get back to cars for sure. Automotion is this weekend. Do I wear hotrod gal? Or Eskimo??? No idea now who all is making the run!? So guess no worry about meeting place. Find it yourself then!!!
|
5/11/2013 8:38:53 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
morles
San Antonio, TX
70, joined Nov. 2007
|
....................1937 HUNT Housecar
....
|
5/11/2013 10:09:17 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
hamaker
Winchester, OR
71, joined Nov. 2009
|
Now there's a motorhome !!
|
5/12/2013 3:02:33 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
stargazzer
Creighton, NE
66, joined Feb. 2007
|
Now that would sell today!!
Was up checking the Temp 36 as it may yet freze this morning?
|
5/12/2013 7:41:39 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
stargazzer
Creighton, NE
66, joined Feb. 2007
|
Coffee is ready for anyone even hens that stop bye
Takeing mom out for dinner at noon but after the day warms up I hope to finish the painting on the McCormick LB motor and also set up the Pheasant pen for day old birds to come soon.
|
5/12/2013 8:27:34 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
morles
San Antonio, TX
70, joined Nov. 2007
|
Yepper I would like to find a OLD MOTOR HOME like that.. of course if it was restored with a small chev in it .. I probablly couldn't afford it anyways..
Thanks for the Coffee Star...
I am taking my Tribe of 10 to Sea World today ... I hope these Mother's enjoy it... after talking me (including SLK) to buy new Range and Oven yesterday..it even has a bigger Oven .. I said yea but what about my Wallet its going to be a Hell of Lot smaller which it was..
[Edited 5/12/2013 8:28:22 AM ]
|
5/12/2013 8:33:29 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
igayle
Marshfield, MO
75, joined Jun. 2010
online now!
|
....................1937 HUNT Housecar
....
I really like this except it's way too low...I love to go traveling but not in those honkin big motor coaches.
Wonder what the inside looks like????..Bet it doesn't have a bathroom.
I'll carry a coffee can...............
|
5/12/2013 9:06:06 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
morles
San Antonio, TX
70, joined Nov. 2007
|
Gayle you would be the last one I would think saying a Vehicle is to LOW>..
............Nothing wrong with a Coffee Can... Just Say'n....
|
5/12/2013 9:30:32 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
igayle
Marshfield, MO
75, joined Jun. 2010
online now!
|
Now Les you know the best things come in small packages...consider emeralds, diamonds, rubies and such.
I like high because I still jump well even with full coffee can in hand
|
5/12/2013 12:55:32 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
orz
Portage, WI
64, joined Jul. 2010
|
Hmmm..is it slammed? Only car related I did yesterday was glue the back bumper on my 50 pickup model. And the license plate. Wonder what idiot who designs these thinks a chromey flat plate will stay glued to the ridge of the box? At least it isnt like the old days when I got more glue on me than the models! New clasic truck mag and Hotrod came in so guess I dont mind that is is only 45 F***ing degrees outside in MAY!! I noticed the neighbor has his old Airstream parked for sale by the highway. Wonder what he is asking for that. They sure are pretty, all chrome looking.
|
5/12/2013 1:49:40 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
motorcity4570
Marysville, MI
64, joined Jun. 2009
|
It isn't over 26 miles away ~ Why don't you go check for us ?
~ Is the Airstream
~ a motor home
~ a bumper pull
~ a gooseneck
~ is it a big one ?
~ Airstreams are pretty
|
5/13/2013 7:40:54 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
stargazzer
Creighton, NE
66, joined Feb. 2007
|
Good Morning gearheads, coffee is on but almost gone
Guess my 150 pheasants are comeing today, at least the 80's & 90"s degree temps will be welcome for them as to saturdays freezing temps
Hope to put the McComick LB motor together today as I have it painted now. Hopeing it will run when done as I have never had it runing, I just belive that it will. faith goes a long way does it not
|
5/13/2013 7:54:17 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
igayle
Marshfield, MO
75, joined Jun. 2010
online now!
|
Just replenishing the coffee then I'm out of here........
Unless you'd rather I stay for a while....
|
5/13/2013 8:00:06 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
stargazzer
Creighton, NE
66, joined Feb. 2007
|
Thanks, now Scat and take this with you
|
5/13/2013 12:30:49 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
orz
Portage, WI
64, joined Jul. 2010
|
The "airstream" is humpy on both ends. I know he has been trying to sell it for a few years so doubt the price is anything we want to pay! I would love to have one of those tiny hardboiled egg ones that towed behind. I need this one like a hole in the ground. I already have an RV that my boarder is supposed to buy from me. 60s (?) Ford one ton truck under it. Low milage but no title. The truck alone is worth something. Not working on cars but gonna cut steel floor for the shipping container. Does that count?
|
5/13/2013 1:20:01 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
bill_43
Nokesville, VA
71, joined Aug. 2007
|
I'm sure you can get this one cheap...
|
5/13/2013 2:01:34 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
stargazzer
Creighton, NE
66, joined Feb. 2007
|
found out the Pheasant chicks woun't be comming today, maybe tomarow but if not will have to wait for the next hatch.
81 degrees & windy 88 expected high, tomarow is mid to uper 90's
|
5/13/2013 3:34:06 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
bill_43
Nokesville, VA
71, joined Aug. 2007
|
Is this a dodge??? I was just looking at pictures from a local show that was yesterday when I saw this.. I'm Thinking it's a Dodge Magnum by the roof line and windows... That's some wild custom work...
|
5/13/2013 9:35:51 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
morles
San Antonio, TX
70, joined Nov. 2007
|
Is this a dodge??? I was just looking at pictures from a local show that was yesterday when I saw this.. I'm Thinking it's a Dodge Magnum by the roof line and windows... That's some wild custom work...
...............Lot of wasted man hours as this car is PLAIN F**KING UGLY... End of Story
|
5/13/2013 9:38:19 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
morles
San Antonio, TX
70, joined Nov. 2007
|
For decades, General Motors' LS V-8 engines have been a favorite of hot rodders, since GM builds them by the minute and their pushrod construction makes them easy to tune. Now a Washington shop has gone where few other craftsmen fear to tread by messing with the basic design of the aluminum LS to build a V-12 from the parts of two Corvette-ready V-8s — with a level of ingenuity and skill that's easy to appreciate even if you think a firing order is something Army recruits learn in basic training.
Cutting up and reforming an engine block may seem like little more than superfluous labor — why not just buy a bigger engine to begin with? — but it's a daring, complex undertaking, the welder's equivalent of open-heart surgery. Adding cylinders requires re-routing oil, air, exhaust and water, deducing how the new engine will run and building the supporting parts, heads and computer controls to make it fire without immediately turning into a gas-powered ball of shrapne
|
5/13/2013 10:42:02 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
stargazzer
Creighton, NE
66, joined Feb. 2007
|
Looks like a Ply.Valaint with lincon head lights
|
5/14/2013 12:05:28 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
bub049
Minneapolis, MN
67, joined Oct. 2010
|
Is this a dodge??? I was just looking at pictures from a local show that was yesterday when I saw this.. I'm Thinking it's a Dodge Magnum by the roof line and windows... That's some wild custom work...
Holy crap! What a disaster! Bill is right. It is a Magnum.....
With 58 Lincoln headlights and some monster Caddy Dagmars.
All I can say is..... WHY?
|
5/14/2013 7:03:17 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
shellfishguy
Hyannis, MA
67, joined Mar. 2009
|
Something else to toss into that equation, too, Bull - how tricky is/was it lining up the crank journals? ?? Build a new one (crank) from scratch? ? ? End to end, off by only a couple of thousandths, at 4500 rpm, B A N G ! ! ! Nothin' but pieces and a big oil stain!!
|
5/14/2013 8:04:08 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
morles
San Antonio, TX
70, joined Nov. 2007
|
.....................Its beyond me Shell"WHY" on this entire project...
|
5/14/2013 8:18:40 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
stargazzer
Creighton, NE
66, joined Feb. 2007
|
To hot for coffee as were now haveing San Antonio weather
going to put the LB motor all together & may even try to start it, likely should wait a few days maybe to put the stickes on the new paint ? Will try to get a picture of it to my profile soon.
|
5/14/2013 8:47:35 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
stargazzer
Creighton, NE
66, joined Feb. 2007
|
It's the "I can do it" thing. For me it's "I can't" thing.
|
5/14/2013 8:52:55 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
motorcity4570
Marysville, MI
64, joined Jun. 2009
|
.....................Its beyond me Shell "WHY" on this entire project...
~
~ Okay they built it
~Where are they going to put it ?
~ and how much did this cost ?
|
5/14/2013 12:21:09 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
stargazzer
Creighton, NE
66, joined Feb. 2007
|
Thats a nice 1926 Model T
Got my McComick LB motor done, went to open the door to wheel it out side and
The garage door came crashing down again, I'm guessing Lurch did not tighten some set screws tight enough?
Computer says it is already 98 this morning
|
5/14/2013 12:45:44 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
orz
Portage, WI
64, joined Jul. 2010
|
Anyone who paints GREEN flames should be shot! Actually..if you took that grill and bumper and put a car behind them, you'd have something neat. I cant imagine how to make two 8s into a 12. And if going to that much work, why not just make a 16 then!! Got one sheet of heavy pole corregated for the shipping container floor cut. Who is the idiot who designed metal shears anyway. Dumbest thing ever. They always pinch. Why not offset the handles!!
|
5/14/2013 4:51:22 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
bub049
Minneapolis, MN
67, joined Oct. 2010
|
That is a stunning Model T, Steve!
Thank you for sharing it!!!
|
5/14/2013 10:43:49 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
morles
San Antonio, TX
70, joined Nov. 2007
|
I cant imagine how to make two 8s into a 12. And if going to that much work, why not just make a 16 then!!
.................................................."Chevrolet V-16"
|
5/14/2013 11:45:33 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
lovetoplay642
Beaverton, OR
68, joined Apr. 2011
|
.................................................. "Chevrolet V-16"
Now if I can just fit that in my '63 MGB.....
|
5/15/2013 2:04:39 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
stargazzer
Creighton, NE
66, joined Feb. 2007
|
My McCormick LB is now on my profile page bull, I din't have two marble collums for displaying it
|
5/15/2013 6:41:39 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
bill_43
Nokesville, VA
71, joined Aug. 2007
|
Nice job, Star.... Really looks good...
|
5/15/2013 6:47:29 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
bill_43
Nokesville, VA
71, joined Aug. 2007
|
|
5/15/2013 7:39:15 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
stargazzer
Creighton, NE
66, joined Feb. 2007
|
Guess I should have wore my glasses Puting on the stickers, Had trubble with them, I don't get much pratice at stickers and they never give derections and not all work quite the same, I may end up doing it over
Guess my pheasants are now comeing next monday?
60 to 78 today, yesterdays 101 was a bit warm.
Coffee is ready I'm off to both Yankton & Norfork today & will be exceeding my 26 mile limit
|
5/15/2013 11:19:14 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
orz
Portage, WI
64, joined Jul. 2010
|
That V16 is pretty enough to set in my living room next to the Harley! Put up driving yesterday and coast stopping to try to not get the brake squeal. Got home and felt the wheels. Oh yeah....it is the NEW brake side. That one was hot and the un-done was cool. So something is off or too tight so have to pull that damn wheel apart again. GRRRR. Eric came early and put the semi trailer I bought off him in the spot I said to. And then it started to sink the jack so ended up moving it to a different place more level. I have some big jacks that are made to hold a cab over camper up when off...thinking of adding them to the sides. And see if I can get some oak logs cut and set under also. That is one heavy trailer..old refeerer.
|
5/15/2013 9:39:36 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
morles
San Antonio, TX
70, joined Nov. 2007
|
Guess I should have wore my glasses Puting on the stickers, Had trubble with them, I don't get much pratice at stickers and they never give derections and not all work quite the same, I may end up doing it over
|
5/15/2013 9:55:45 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
morles
San Antonio, TX
70, joined Nov. 2007
|
Hey Star I will have to agree on the Sticker..(Decal) may need attention...
...........................How do you do on putting Band-aids on...
|
5/15/2013 11:10:42 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
bub049
Minneapolis, MN
67, joined Oct. 2010
|
I have a cousin that lives in "Bull Town" (San Antonio).....
He just sent me picture of a 3' sinkhole in the street in front of his house that was opened when a garbage trunk drove down the street this morning.....
Better leave the F150 in the barn, Bull.....
Borrow the BroomWench's broom!!!!!
|
5/16/2013 12:00:29 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
bub049
Minneapolis, MN
67, joined Oct. 2010
|
that v16 is some gorgeous iron alright. and the mcormick deering is cool too. here's something for you gearheads. if this doesn't trip your trigger, better check your pulse, whole lotta cool history here.
http://www.standard1320.com/Ivo/Buicks/TwinBuick/TwinBuick.html
Hey Steve! That was the most awesome write-up about "TV Tommy Ivo" I have ever seen!
Thank you for sharing it!!! Made my day!
|
5/16/2013 9:38:47 AM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
stargazzer
Creighton, NE
66, joined Feb. 2007
|
Good morning Gearheads, Cold Beer & tomato juce Or red beer for everyone cus it is thrusday &
|
5/16/2013 7:05:55 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
stargazzer
Creighton, NE
66, joined Feb. 2007
|
No one showed up so I had to drink all the beer myself
This is my call in sick for tomarow
|
5/16/2013 7:16:35 PM |
Antiques...Rat Rods and Hot Rods "ONLY" |
|
lilbritches39
Marshfield, MO
70, joined Feb. 2013
|
B O O O
I am the ghost of igayle come to haunt you.....................
I repeat
B O O O O Oetc.
|