Flagged.

How can an Australian commit treason in the US on the internet?

Now that was one retarded comment

Answer me wise one. If we had a REAL investigation into 9/11 and found out that the culprits were in another country, would we not go after them? If the culprits were paying some scumbags in another country to help them hide their crime,would we not have a prison cell waiting for them scumbags as well? Bet your a** on it!

I rest my case

Okay, because you CANNOT answer my question to show proof that others than the clean up crew cut the columns...let's try this one:

Please provide information how the "bad guys" went into the buildings, cut the columns, laid the explosive charges, or the thermite (take your choice) and how they did this without being spotted by thousands that work there.

Also please list how many people it would have taken to undertake this task.

From the video's comments:

"I worked as an industrial welder for years and often used acetylene cutting torches to cut thick metal. (Not the more recent innovations with thermite cutters mentioned.) Every time I saw this photo I was immediately reminded of that process, though thermite charges seemed almost as likely to produce such a result. The ridges in the cut and the slag is very typical. So I will readily back the claim that it was part of the cleanup process and that our focus should be elsewhere when it comes to solid evidence -- unless of course this photo was from Sept 11 or before cleanup crews were at work. Regarding the angled cut, for anyone who has felled a tree, this angle on vertical beams will come as no surprise. It is a way of controlling the weight and tendency to fall. It was surely not a way of working around obstructions, and yes, it is more material to cut, but safety for the cleanup worker would be the primary concern, so it is no coincidence that all those cut beams show a similar cut, designed to contain chaos."

I know a welder who will vilify that opinion until a blood vessel gives out.



9/11 truth, disagreeing with itself for over 14 years.

From the video's comments:

"I worked as an industrial welder for years and often used acetylene cutting torches to cut thick metal. (Not the more recent innovations with thermite cutters mentioned.) Every time I saw this photo I was immediately reminded of that process, though thermite charges seemed almost as likely to produce such a result. The ridges in the cut and the slag is very typical. So I will readily back the claim that it was part of the cleanup process and that our focus should be elsewhere when it comes to solid evidence -- unless of course this photo was from Sept 11 or before cleanup crews were at work. Regarding the angled cut, for anyone who has felled a tree, this angle on vertical beams will come as no surprise. It is a way of controlling the weight and tendency to fall. It was surely not a way of working around obstructions, and yes, it is more material to cut, but safety for the cleanup worker would be the primary concern, so it is no coincidence that all those cut beams show a similar cut, designed to contain chaos."

I know a welder who will vilify that opinion until a blood vessel gives out.



9/11 truth, disagreeing with itself for over 14 years.

From the video's comments:

"I worked as an industrial welder for years and often used acetylene cutting torches to cut thick metal. (Not the more recent innovations with thermite cutters mentioned.) Every time I saw this photo I was immediately reminded of that process, though thermite charges seemed almost as likely to produce such a result. The ridges in the cut and the slag is very typical. So I will readily back the claim that it was part of the cleanup process and that our focus should be elsewhere when it comes to solid evidence -- unless of course this photo was from Sept 11 or before cleanup crews were at work. Regarding the angled cut, for anyone who has felled a tree, this angle on vertical beams will come as no surprise. It is a way of controlling the weight and tendency to fall. It was surely not a way of working around obstructions, and yes, it is more material to cut, but safety for the cleanup worker would be the primary concern, so it is no coincidence that all those cut beams show a similar cut, designed to contain chaos."

I know a welder who will vilify that opinion until a blood vessel gives out.



9/11 truth, disagreeing with itself for over 14 years.

HAHAHAHA F**KINHAHA. YOU ARE ONE STUPID F**KIN IDIOT POSTING THAT BULLSHIT.

class will use some big words nobody understands though

Here's a snippit from the exact webpage that you got your horseshit lies from that you posted above shill. My posting is clearly from a seasoned welder as myself while the idiots statement that you posted is CLEARLY A PAID SHILL LIKE YOUR PATHETIC SELF.Now read what a REAL WELDER has to say about that huge column at ground zero with the 45 degree cut.Read it and weep ....

"I too am a welder fabricator...For thirty years. I also worked as an iron worker. The slag is on the outside which rules out a torch cut. I would use a lance,sometimes called a burning bar. It would explain the slag on the outside . As for the fallen tree theory. You don't try an drop steel like this. For safety sake you would attach a choker via crane or large track hoe. You would not waste time with an angled cut.. The equipment used would direct the fall.
If they did try to use this angled method for direction control (which is unsafe as hell) You would only cut the sides and the back of the column. This would show the inside of the column bent , and torn.
There is only one explaination for the slag on the outside of the column, and the diagonal cut.
CUTTER CHARGES.............PERIOD."

Submitted by WISDOM on Sun, 10/12/2008 - 12:48pm.

God it must suck being a deceptive piece of shit

You use big fancy assed words that only snobby assed fancy b*tches use trying to outsmart and impress each other.The kind of shit society that the rest of us wanna smack the shit out of.

To call 57 a shill, tells me you have no clue on its meaning. Go look the word up fancy pants and to your surprise will find a pic of your mug there.